Serena Premium Pre-Cut Sauna
 

table1

  • Walls & Ceiling 1x4 Clear Western Red Cedar 11/16” thick, Kiln dried
  • V-joint T&G, Pre-sanded
  • Foiled vapor barrier
  • Door with Glass Window and Door Jamb
  • 2x4 western red cedar, pre-sanded, for one or two level straight or L Shape benches, bracing and bench supports
  • Sauna Heater with controls and rocks
  • 1x4 Floor, duck board on walking area
  • 1x4 Heater Guard
  • Vapor Proof Marine Light
  • Galvanized nails and screws

    Material offered:

    Serena Sauna uses the highest selected grade of clear, kilndried, western red cedar. Western cedar is renowneed for its high impermeability to liquids and natural phenol preservatives. This natural wood is ideally suited for exterior and interior use in extremely humid conditions. The cellular composition of cedar - millions of microscopic air-filled cells - provides superior insulating qualities. Cedar’s rich colour and resistance to decay are due to its natural oils. This is why Serena Saunas are the best of their class and exceptionally durable.
    Western Red cedar clear A+ better 2x4 Double T&G 1x4 T&G
    cedar_western_red cedar_2x4

    cedar_1x4

    FEATURES
    • Energy efficient - Designed to heat the sauna room, not the heater itself.
    • Safety – 100% stainless steel construction, the body of the heater runs cooler than any other heater, very safe for sauna bathers.
    • Durability – Very low density incoloy silver soldered heating elements with little radiant heat are used. The lower the density, the longer the life of the heaters.
    • Comfort – User friendly programmable digital control, easy to operate
    Serena Sauna Heaters Harvia
    ss_wall ss_floor harvia_vega
    Wall Mount Floor Mount Wall Mount

    heaters_table

    60 Min Mechanical Control
    mechanical-control

    Mechanical thermostat with 12 ft. capillary sensor

    (10°C/50°F - 90°C/190°F) 60 minute timer (0 -60min.) Indicator light Stainless steel cover plate
    Top
    Advance Blue Designer Control w/ Aroma Therapy Steam Head (s)
    advanced_blue_gold
    Chrome & silver trim in blue appearance Chrome, brushed nickel, brass and gold trim in beige appearance
    The control can be installed outside/inside sauna to control the time and temperature of the rooms. It stores 2 temperature setpoints and 4 time settings. Comes with a standard 15 ft connector cable and 20 ft sensor cable (extendable). To extend up to 50 ft, use RG3, RG5 cables or any 2 pairs cable (22 to 18 AWG).
    Functions
    1. Time control: 1 to 240 minutes. Preset for 4 time values; t1, t2, t3 and t4.
    2. For example, t1=30 min, t2=45 min, t3=60min, t4=90min.
    3. Temperature control: from 0° to 99°C (32° to 210°F). Preset for 2 temperatures, SP1 and SP2.
    4. Temperature display: Celsius or Fahrenheit. ON/OFF: Turns the unit ON or OFF at any desired time.
    The values programmed by users are stored in memory in case of power outage.
    Top
    Power Junction Box

    power-box

    Power Junction box is an electrical box which houses the electronic board that drives the controls and contactor. The main power wire is terminated in this box, and from there runs to the sauna heater unit.

    Top
    24 HR / 7 Day Digital Timer
    24_7_digital_timer
    - Manual Override
    The 24-hour/7-day control programming capability allows a different schedule for each day of week. With 16 setpoints available, these time controls provide programming versatility.
    Specifications:
    - 16 Setpoints
    - 24-Hour or 7-Day Programming
    - Selectable Clock Format - 12 hour (AM/PM) or 24 hour format
    Top
    A419 Series Electronic Temperature Control

    a419_1

    The A419 electronic temperature control features:
    - Easy-to-Read Liquid Crystal Display
    - Setpoint Range of -30 to 212ºF (-34 to 100ºC)
    - Wide Adjustable Differential 1 to 30ºF or Cº
    - Anti-Short Cycle Time Delay
    - Interchangeable Temperature Sensors (up to 310 feed by Gauge 18 wire)
    - Temperature Offset Function (triggered by an external timer)
    - Easy programming through lockable three button keypad
    - LED indicates output relay status
    - Displays a message if sensor failed
    Top
    ETC Two Stage Electronic Temperature Control

    ranco

    ETC is a two stages electronic temperature control, featuring:
    - Wide setpoint temperature range (-30ºF to 220ºF) and differential adjustment (1ºF to 30ºF)
    - Simple keypad programming of setpoint temperature, differential
    - Two individually programmable heating stages
    - LCD readout of sensor temperature (C/F), control settings, relay status and onboard diagnostics
    - Remote temperature sensing up to 400 feet
    - Lockout switch to prevent tampering by unauthorized personnel
    Top

    Benches
    bench4
    bench_1c bench_2s
    Backrest Headrest
    backrest headrest1
    Bucket & Ladle Brush

    bucket

    brush
    Towel Hook Door Handles

    hook

    handles

    Air Intake Metal Louver Air Exhaust Wood Louver
    metal_louver wood_louver
    Sauna Wood Preserve Fragrance (concentrate)
    reservior fragrance
    Sauna Sign Sand Timer
    rules sand_timer
    Thermo-Hygrometer Thermometer
    thermohydrometer thermometer
    Painted Aluminium Thermometer Sauna Clock
    aluminium_thermometer clock
    Sauna Light Sauna Light
    sauna-light sauna_light
    Alarm System

    alarm

    Alarm Bell Emergency Stop
    heat-detector e_stop-push-turn